All authors
Claude Skills by carla-simulator
github.com/carla-simulator60 skills0 installs0 views
- Create Leaderboard RouteCreates and edits CARLA Leaderboard route files — placing waypoints and scenario trigger points interactively from the spectator camera (route_creator, scenario_creator), visualising an existing route in the simulator (route_displayer), summarising it as a table (route_summarizer), capturing the current weather in route format (weather_creator), sorting scenarios by route position (scenario_orderer) and converting 1.0-format routes to 2.x (route_bridge). Use when the user asks to "make a new ...Votes: 0GitHub stars: 14,461
- Package Leaderboard AgentPackages an agent for CARLA Leaderboard submission — builds the docker image with make_docker.sh (plain or ROS variant), checks the four required roots and the egg layout it assumes, sets the agent/track/routes environment inside the image, and verifies the image can import the stack and load the agent before submission. Use when the user asks to "build the leaderboard docker image", "submit to the leaderboard", "package my agent", or make_docker.sh fails.Votes: 0GitHub stars: 14,461
- Read Leaderboard ResultsReads a CARLA Leaderboard results.json — per-route driving score, route completion, infraction penalty and the infraction lists — explains how the score was computed for that leaderboard version, and rescores an existing result under the other version's rules (2.0 multiplicative vs 2.1 additive) without re-running anything. Also diffs two runs and merges sharded result files. Use when the user asks "what did I score", "why is my score low", "did my agent pass", "why don't my scores match the ...Votes: 0GitHub stars: 14,461
- Run Leaderboard EvaluationRuns the CARLA Leaderboard evaluator over a set of routes with your agent — routes/routes-subset/repetitions/track selection, checkpoint and live-results endpoints, resume after a crash, recording, and the debug levels — for leaderboard 1.0, 2.0 or 2.1. Preflights the whole stack (version pairing, maps, ports, agent class, sensor budget) before spending hours, and hands the world back in async mode. Use when the user asks to "run the leaderboard", "evaluate my agent", "run routes_training", "...Votes: 0GitHub stars: 14,461
- Write Leaderboard AgentWrites an autonomous agent for the CARLA Leaderboard — an AutonomousAgent subclass with setup/sensors/run_step/destroy, a sensor suite inside the track's budget, and the right constructor signature for the leaderboard version (1.0 and 2.x differ). Generates a working skeleton, validates the sensor configuration against the real per-track limits offline, and covers the ROS1/ROS2 agent base classes. Use when the user asks to "write a leaderboard agent", "make my agent work with the leaderboard"...Votes: 0GitHub stars: 14,461
- Bounding BoxesGets actor and level 3D bounding boxes and projects them into a camera image as 2D boxes — the dataset-annotation workflow. Lists box geometry, draws 3D boxes in the world via debug, or captures one camera frame and writes an annotated PNG plus a JSON of 2D boxes for matching actors. Use when the user asks to "get bounding boxes", "draw boxes around the cars", "project boxes onto the camera", or "generate a detection dataset / annotations".Votes: 0GitHub stars: 14,461
- Control LightsControls the map's light sources through the CARLA LightManager — turn street lamps, building/facade lights, vehicle lights or all of them on/off, set their colour and intensity, and toggle the automatic lights-at-night cycle. Use when the user asks to "turn on the street lights", "light up the city at night", "turn off building lights", "change the street-light colour", or "make lights come on automatically at night". Distinct from hiding lamp meshes (toggle-env-objects) and the sun (set-wea...Votes: 0GitHub stars: 14,461
- Control SpectatorMoves the CARLA spectator camera, frames an actor, or follows one live — third-person/chase, first-person/driver, top-down, or front views, resolving natural-language targets like "the ego" or "the Toyota Prius" to a specific actor. Use when the user asks to "move the camera/spectator", "watch/follow vehicle X", "3rd-person view of the ego", "1st-person view of the prius", "bird's-eye view", or "look at (x,y,z)".Votes: 0GitHub stars: 14,461
- Control Traffic LightsControls the traffic-light actors on a running CARLA server — set a light green/red/yellow/off, freeze all lights (optionally all-green), set phase timing (green/yellow/red durations), and reset to the normal cycle. Target all lights, one by id, all in a junction, or the nearest. Use when the user asks to "make the light red", "freeze all lights green", "change the light timing", "turn the traffic lights off", or "reset the lights". This is the light actors, not the Traffic Manager (that's co...Votes: 0GitHub stars: 14,461
- Control TrafficTunes the CARLA Traffic Manager that drives autopilot vehicles — global and per-vehicle speed, following distance, running lights/signs, lane-change behaviour, lane offset, TM-managed lights, deterministic seed, hybrid physics, and TM sync mode. Use when the user asks to "make the traffic faster/slower", "let cars run red lights", "keep more distance", "stop lane changes", "make traffic deterministic", or otherwise change how autopilot cars behave. For manually driving one car, use control-ve...Votes: 0GitHub stars: 14,461
- Control VehicleDirectly drives a specific vehicle on a running CARLA server — raw VehicleControl (throttle/steer/brake/reverse/hand-brake), Ackermann speed control, vehicle lights, opening/closing doors, and physics-control tuning; ros-info reports the native ROS 2 command topics (vehicle_control_cmd, ackermann_control_cmd) for the hero. Targets the ego by default. Use when the user asks to "drive/steer the car", "accelerate/brake/reverse", "set a target speed", "turn on the headlights/blinkers/brake lights...Votes: 0GitHub stars: 14,461
- Create SensorSpawns and attaches sensors on a running CARLA server — cameras (rgb/depth/semantic/instance/optical-flow/normals), lidar, radar, IMU, GNSS, collision/lane-invasion/obstacle — to the ego or any actor, with a mount transform and blueprint attributes (resolution, fov, sensor_tick, lidar range/points, …). Also sets up native ROS 2 publishing (--ros to enable_for_ros, --ros-name/--ros-frame-id topic and TF naming) and prints the topics the sensor will publish. Use when the user asks to "add a cam...Votes: 0GitHub stars: 14,461
- Debug DrawDraws debug overlays in a running CARLA world via world.debug — points, lines, arrows, bounding boxes, and text strings, each with a colour and lifetime. Use when the user asks to "draw/mark/highlight a point or box in the world", "visualise a path/waypoints", "label a location", or "show something on the map for debugging". Shapes are an overlay, not actors.Votes: 0GitHub stars: 14,461
- Debug NavmeshVisualises and validates a map's pedestrian navigation mesh by sampling walkable locations (get_random_location_from_navigation) and drawing them as debug points. Use when the user asks to "show/visualise the pedestrian navmesh", "check walkable areas", "validate pedestrian navigation after a map import", or "why won't my walkers move". Confirms the navmesh loaded and how far it covers.Votes: 0GitHub stars: 14,461
- Load MapLoads, reloads, and reshapes the map on a running CARLA server via the Python API — get_available_maps, load_world and reload_world (with or without resetting world settings), generate a world from an OpenDRIVE .xodr, and load/unload map layers. Use when the user asks to "load a map", "change the town", "reload the world", "list available maps", "load an xodr/opendrive map", or "load/unload map layers", and when settings (sync mode, fixed delta) must survive the switch.Votes: 0GitHub stars: 14,461
- Map WaypointsExplores a CARLA map's road network through the Map/Waypoint API — a natural-language rundown of the whole map ("give me the topology"), drawing the topology to confirm the modelled map matches the visible one, enumerating junctions to resolve phrases like "the 4-way junction in the middle", nearest-waypoint lane facts, and next/previous lane navigation. Use when the user asks about the map's layout, lanes, junctions, topology, or to locate/navigate specific map elements.Votes: 0GitHub stars: 14,461
- Navigate ToDrives a vehicle to a destination autonomously using CARLA's navigation agents (BasicAgent/BehaviorAgent/ConstantVelocityAgent), or plans a route between two points with GlobalRoutePlanner. The agent handles routing, obstacle avoidance and traffic-light obedience. Use when the user asks to "drive the ego to (x,y,z)", "navigate to the junction", "go to that location", "plan a route from A to B", or "make the car drive itself somewhere specific". Manual control is control-vehicle; autopilot roa...Votes: 0GitHub stars: 14,461
- Query RecordingInspects a recorded CARLA .log without replaying it — show_recorder_file_info for the header/actors/frames, collision queries between actor categories, and blocked-actor queries for vehicles that got stuck. Use when the user asks to "what's in this recording", "show recorder info", "which vehicles collided", "find collisions in the log", or "which actors were blocked/stuck".Votes: 0GitHub stars: 14,461
- Read SensorListens to a CARLA sensor and either saves its data to files, shows it live in a window, prints a one-shot summary, or (ros-info) reports the native ROS 2 topics, QoS and enabled-for-ROS state so you can echo it from ROS instead. Cameras save as PNG (depth/semantic auto-colourised) and display in a pygame window; lidar saves as .ply and shows as a top-down scatter; IMU/GNSS/radar/collision stream to JSONL or the console. Use when the user asks to "show/view the camera", "display the lidar", "...Votes: 0GitHub stars: 14,461
- Record SimulationRecords a running CARLA simulation to a .log file via start_recorder/stop_recorder for later deterministic replay — capturing actor spawns, transforms, traffic-light states and animations (optionally velocities/controls). Use when the user asks to "record the simulation", "start/stop the recorder", "capture this run", or "save a scenario to replay later". Does NOT capture sensor images.Votes: 0GitHub stars: 14,461
- Replay RecordingReplays a CARLA .log recorded by the recorder — the whole run or a time window, at any speed, following a chosen actor, optionally regenerating sensors and restoring weather. Use when the user asks to "replay the recording", "play back the run", "watch it again in slow motion / at 2x", "follow vehicle N during replay", or "replay onto a different map".Votes: 0GitHub stars: 14,461
- Set WeatherReads and sets the weather on a running CARLA server via get_weather/set_weather, and turns natural-language weather requests ("heavy rain at sunset", "light fog at night", "clear noon", "dust storm") into exact WeatherParameters — cloudiness, precipitation, puddles, wind, fog, sun position, wetness, dust. Use when the user asks to "set/change the weather", "make it rainy/foggy/sunny/night", "apply a weather preset", or describes any sky/lighting condition.Votes: 0GitHub stars: 14,461
- Set World SettingsReads and changes a running CARLA server's WorldSettings via apply_settings — synchronous vs asynchronous mode, fixed_delta_seconds (fps), physics substepping, and no_rendering_mode — and keeps the Traffic Manager's sync state matched automatically. Use when the user asks to "enable/disable sync mode", "set synchronous mode", "run at a fixed fps/step", "turn off rendering", "make the sim deterministic", or "restore async mode", and as the prerequisite for keeping settings across a map load.Votes: 0GitHub stars: 14,461
- Spawn VehiclesSpawns vehicles on a running CARLA server and destroys them — scattered across the map's spawn points on Traffic Manager autopilot, a row queued in a single lane at a fixed spacing, or a single hero/ego vehicle (optionally named for native ROS 2 publishing with --ros-name). Covers blueprint filtering, the atomic autopilot hand-off, and cleanup. Use when the user asks to "spawn vehicles/cars/traffic", "add N cars driving around", "put cars in a lane 15 m apart", "spawn the ego/hero vehicle", o...Votes: 0GitHub stars: 14,461
- Spawn WalkersSpawns pedestrians that wander autonomously via WalkerAIController, and destroys them in the correct order. Pairs each walker.pedestrian.* with a controller.ai.walker, places them on the navigation mesh, and sends them to random navmesh points at walking speed. Use when the user asks to "spawn pedestrians/walkers", "add people/crowds", "make pedestrians walk around", or "remove the walkers". Reads the world settings first: if the world is already synchronous it never ticks it, and if it is as...Votes: 0GitHub stars: 14,461
- TelemetryReads a specific actor's live telemetry from a running CARLA server — location and rotation, velocity and speed, acceleration, angular velocity, and for vehicles the control input (throttle/steer/brake), front-wheel steer angle and mass. All kinematics come from one world snapshot so they are frame-consistent. Use when the user asks "how fast is it going", "where/what heading is the car", "show the ego's telemetry", or "stream a vehicle's state". Resolve ambiguous targets with the world-data ...Votes: 0GitHub stars: 14,461
- Toggle Env ObjectsLists and toggles a map's static environment objects via get_environment_objects / enable_environment_objects — hide or show buildings, vegetation, poles, fences, traffic signs and other baked assets by CityObjectLabel (and optional name filter). Use when the user asks to "hide/remove the buildings", "turn off the trees/vegetation", "show only the roads", "disable the fences", or "list the environment objects". Affects rendering and collision; resets on map reload.Votes: 0GitHub stars: 14,461
- World DataQueries the live CARLA world and resolves an entity description into a concrete actor id — find actors by type, role, or colour, or the single one nearest a point/actor; read the world snapshot; get static level bounding boxes by label; cast rays for semantic points; project a point to the ground; or (ros-topics) list the native ROS 2 topics each actor should be publishing and why any is silent. Identifies by stable attributes, not by any rank/order. Use when the user asks "what actors are he...Votes: 0GitHub stars: 14,461
- Add Ros Message TypeAdds a new ROS 2 message type to CARLA's native ROS 2 interface — the hand-written POD struct under LibCarla/source/carla/ros2/types/msg, its Fast-CDR serialize/deserialize pair, the RIHS01 type hash computed in Docker, the CdrTopicInfo registration and the type-hash test. Use when the user asks to "add a ROS message type", "support sensor_msgs/X in CARLA", "add a carla_msgs type", "why is my type hash warning appearing", or needs a message CARLA does not publish yet. There is no IDL codegen ...Votes: 0GitHub stars: 14,461
- Add Ros PublisherAdds a new topic to CARLA's native ROS 2 interface — a publisher (BasePublisher + PublisherImpl, topic suffix, QoS, registration in ROS2::GetOrCreateSensor, a ProcessDataFrom* entry point and its call site in the UE4 plugin) or a subscriber that lets ROS drive an actor. Also covers adding a middleware (RMW) behind IPublisherMiddleware. Use when the user asks to "publish X to ROS from CARLA", "add a ROS topic/publisher/subscriber", "make the obstacle/lane-invasion sensor publish", "add odometr...Votes: 0GitHub stars: 14,461
- Visualize Ros RvizInspects and visualises a ROS-2-enabled CARLA server from Docker containers, with no local ROS 2 install — list/echo/rate-check topics (the "are the topics actually on the wire" check), run the bundled map-and-lidar demo stack (hero vehicle with camera/lidar/GNSS/IMU on autopilot), and open RViz2 with the lane-network preset. Use when the user asks to "check the ROS topics", "echo /carla/map", "is CARLA publishing to ROS", "visualise the lidar in RViz", "open rviz", or "run the ROS 2 demo".Votes: 0GitHub stars: 14,461
- Analyze Scenario ResultsReads and summarises ScenarioRunner output — the criteria pass/fail tables from --output/--file, the machine-readable --json and --junit result files, and the criteria JSON written alongside a --record recording — and runs the metrics module (metrics_manager.py) to compute custom measurements over a recorded run offline, without the simulator. Use when the user asks "did the scenario pass", "why did it fail", "summarise these results", "compare these runs", or wants distance/speed/lane metric...Votes: 0GitHub stars: 14,461
- Create ScenarioWrites a new ScenarioRunner scenario — a Python class deriving from BasicScenario with its behaviour tree assembled from srunner atomic behaviours and criteria, plus the XML config that gives it a town, ego spawn and parameters — and registers it so `--scenario MyScenario_1` works. Also covers adding a scenario to a route via --additionalScenario. Generates a working skeleton and validates it without a simulator. Use when the user asks to "create/write a new scenario", "add a custom scenario"...Votes: 0GitHub stars: 14,461
- Run OpenscenarioRuns standard-format scenarios through ScenarioRunner — ASAM OpenSCENARIO 1.x (.xosc, via --openscenario, with catalogs and ParameterDeclaration overrides) and OpenSCENARIO 2.0 (.osc, via --openscenario2, the ANTLR/osc2 pipeline). Validates a file against the schema before running, lists the bundled examples, and reports which OSC features ScenarioRunner actually implements. Use when the user asks to "run an xosc", "run an OpenSCENARIO file", "use the OpenSCENARIO standard", "run a .osc / OSC...Votes: 0GitHub stars: 14,461
- Run Route ScenarioRuns a route through ScenarioRunner's RouteScenario mode (--route / --route-id) with an autonomous agent driving the ego — the same mechanism the CARLA Leaderboard uses, and the only way to reach the ~34 route-only scenario classes (Accident, ParkedObstacle, HazardAtSideLane, InvadingTurn, HardBreakRoute, YieldToEmergencyVehicle, junction and actor-flow scenarios). Inspects route files, lists route ids and their scenarios, and runs one or all of them. Use when the user asks to "run a route", ...Votes: 0GitHub stars: 14,461
- Run ScenarioRuns a single ScenarioRunner Python scenario (or a whole group) against a running CARLA server — FollowLeadingVehicle, ControlLoss, DynamicObjectCrossing, SignalizedJunctionLeftTurn and the rest of srunner/examples — in sync or async mode, with result output, recording and manual/agent control of the ego. Lists what is runnable on the checked-out branch and on the loaded map. Use when the user asks to "run a scenario", "test FollowLeadingVehicle", "list scenarios", "run a CARLA traffic scenar...Votes: 0GitHub stars: 14,461
- Create Scenic ScenarioWrites a new Scenic scenario (.scenic) from a natural-language description — "a car cuts in from the right lane", "a pedestrian crosses in front of the ego", "negotiate an unsignalized four-way" — by turning the request into a spec, generating the file from idioms proven on this build, and validating it by compiling and sampling before any simulator is involved. Use when the user asks to "write a Scenic scenario", "create a .scenic file", "turn this description into Scenic", "generate a scena...Votes: 0GitHub stars: 14,461
- Run Scenic ScenarioRuns Scenic probabilistic scenarios against a running CARLA server with the `scenic FILE --simulate --2d` CLI — the carlaChallenge1-10 traffic scenarios shipped by ScenarioRunner (`model srunner.scenic.models.model`) and by Scenic itself (`model scenic.simulators.carla.model`) — bounding the run, sampling scenes headlessly first to tell a map problem from a syntax problem, and restoring the world afterwards. Use when the user asks to "run a Scenic scenario", "run carlaChallenge", "test a .sce...Votes: 0GitHub stars: 14,461
- Check Feature SupportAnswers "can CARLA do X here, and is there a vetted procedure for it" before you promise anything, and detects client/server/tree version skew — a support matrix over the whole collection (covered by a skill / works but undocumented / present but untested / broken or removed), an index of the features that are verified BROKEN on 0.10.0 (gbuffers crash the server, map layers do nothing, Landmark.waypoint is None, standalone asset packages are gone), and a probe that reports what this machine's...Votes: 0GitHub stars: 14,461
- Download CarlaDownloads CARLA so nothing has to be fetched by hand — an official release package for any published version (resolved live from the GitHub releases, with AdditionalMaps), the rolling nightly Dev build, a shallow source checkout of a branch or tag, or the carlasim/carla Docker image. Reports exactly what was obtained and where, plus the environment variables the other skills read. Use when the user asks to "download CARLA", "get CARLA 0.9.16", "install CARLA", "clone the carla repo", "fetch t...Votes: 0GitHub stars: 14,461
- Install LeaderboardInstalls the CARLA Autonomous Driving Leaderboard (leaderboard.carla.org) at a chosen version — 1.0, 2.0 or 2.1 — together with the exact scenario_runner branch and CARLA build each one requires, then wires the four-root PYTHONPATH and verifies the whole stack imports. Detects which version an existing checkout is by reading its code, not its branch name. Use when the user asks to "install the leaderboard", "set up the CARLA challenge", "evaluate my driving agent", "reproduce my leaderboard s...Votes: 0GitHub stars: 14,461
- Install Python ApiInstalls the CARLA Python client (the `carla` package) into a chosen interpreter so the other python-api skills work — from a wheel bundled with your release or checkout, from PyPI (`pip install carla==X.Y.Z`), or by putting an older release's .egg on PYTHONPATH. Detects what is already present, picks the source that matches your simulator's version, pins numpy<2, and verifies `import carla` plus the client/server version match. Use when the user asks to "install the CARLA Python API", "pip i...Votes: 0GitHub stars: 14,461
- Install Scenario RunnerInstalls CARLA's ScenarioRunner (the official scenario engine) and picks the branch that matches the CARLA in use — master for 0.9.14-0.9.16 (UE4), ue5-master for 0.10.0 (UE5), leaderboard-1.0/2.0/2.1 when driving the Leaderboard. Clones or checks out the branch, installs requirements, wires PYTHONPATH (including the `agents` package the carla wheel does not ship), and verifies the import. Use when the user asks to "install scenario runner", "set up SR", "run CARLA scenarios", "use OpenSCENAR...Votes: 0GitHub stars: 14,461
- Install ScenicInstalls Scenic, the probabilistic scenario description language, for the CARLA in use — pip installing it into the same interpreter that holds the CARLA client, optionally cloning the upstream repo for the example scenarios the wheel does not ship, and verifying that the `scenic` CLI, the client and Scenic's version-keyed blueprint table all agree. Use when the user asks to "install Scenic", "set up Scenic", "download Scenic", "pip install scenic", wants to run `.scenic` files, or has a Scen...Votes: 0GitHub stars: 14,461
- Build Carla Ue4Builds CARLA (branch ue4-dev, Unreal Engine 4.26) from source on Linux end-to-end — UE4 fork, the Carla server (editor C++ modules), the LibCarla Python client wheel, and content — then verifies them against a from-source server. Optionally builds the native ROS 2 interface in (ROS2=1 → --ros2, Fast-DDS/CycloneDDS/Zenoh), which is compile-time only and cannot be enabled later. Use when the user asks to "build CARLA from source", "compile CARLA ue4-dev", "set up CARLA on Ubuntu (incl. 24.04)",...Votes: 0GitHub stars: 14,461
- Import Carla MapImports a custom RoadRunner map (FBX geometry + XODR OpenDRIVE) into a CARLA source build as a drivable map — reads the map from the directory the user names, runs CARLA's Import.py to cook the level, Traffic Manager graph and (standard maps only) pedestrian navmesh, and verifies it loads on a server. Handles both standard maps and large tiled maps; large maps get no navmesh, matching upstream CARLA. Use when the user asks to "import a map into CARLA", "add a custom/RoadRunner map", "ingest a...Votes: 0GitHub stars: 14,461
- Import Carla PropImports FBX meshes into a CARLA source build as spawnable static.prop.* blueprints — pass a directory whose subdirectories name the semantic tags, or a single FBX with its tag, and the props are imported into content, registered, added to the prop factory and verified by spawning. Use when the user asks to "add a prop to CARLA", "import an FBX as a prop", "add street furniture/benches/signs", or needs a custom mesh spawnable from the Python API.Votes: 0GitHub stars: 14,461
- Import Carla VehicleImports an FBX vehicle into a CARLA source build as a spawnable vehicle.<make>.<model> — checks the FBX carries CARLA's 4-wheel bone rig, imports the mesh, then assembles the vehicle through CarlaTools' VehicleAuthoringLibrary (physics asset with kinematic wheel bodies, retargeted anim blueprint, four configured wheel blueprints, the vehicle blueprint), registers it in VehicleFactory through CARLA's own add_vehicle_to_vehicle_factory.py, and verifies it spawns, drives and steers. Use when the...Votes: 0GitHub stars: 14,461
- Import Carla WalkerImports an FBX pedestrian into a CARLA source build as a spawnable walker.pedestrian.NNNN — checks the FBX is skinned to CARLA's GEN3 rig, imports the mesh, physics asset and materials, builds the walker blueprint from a GEN3 donor, registers it in WalkerFactory through CARLA's own add_walker_to_walker_factory.py, and verifies it spawns, stands on the ground and walks. Use when the user asks to "add a pedestrian to CARLA", "import a walker/character FBX", or needs a custom human spawnable fro...Votes: 0GitHub stars: 14,461
- Package Carla Ue4Cooks and packages CarlaUE4 into distributable tarballs under Dist/ — either the full simulator or a standalone asset package of selected maps and props for later import. ROS2=1 keeps the native ROS 2 interface in the cooked package (a plain cook silently drops it). Use when the user asks to "package CARLA", "make a Dist build", "cook the project", "export a map as a package", "package CARLA with ROS2", or needs a build with working camera and lidar sensors.Votes: 0GitHub stars: 14,461